2010-P 50C Satin Finish SP68 认证号20292582, PCGS号416790

CoinFacts 详情

拥有者评论

Type: Kennedy Half Dollar, Type 3, Copper-Nickel Clad (1971- ) Designer: Gilroy Roberts / Frank Gasparro Content: 75% Copper, 25% Nickel over a pure Copper center Weight: 11.30 grams Diameter: 30.61 millimeters Edge: Reeded (150 reeds) Mint: Philadelphia Production Strikes: 1,700,000 (Including both business and satin finish strikes) General Type Description: Beginning in 1971, all silver was removed from the Half Dollar, in favor of the same copper-nickel clad alloy that had been in use on Dimes and Quarter Dollars since 1965. Mintages remained low relative to all other denominations, with the result that the Half Dollar was seldom used or seen in circulation (a situation that persists today). Though somewhat lengthy, this series is easy and affordable to collect as either circulation strikes, Proofs, or both. Some dates, such as 1987-P and D, 2001-P, 2002-P and D, and others were not issued for circulation but are available only in Mint sets, adding a bit of a challenge. Major varieties include a 1972 No “FG” and a 1974 Doubled Die Obverse. (Source:: Guth, Ron. PCGS CoinFacts) Specific Issue Description: Beginning in 2002, Kennedy Half Dollars have only been struck to satisfy the demand from collectors and made available at a premium through the Mint as no regular business strike coins were produced for circulation. Beginning in 2005 (and though 2010), Kennedy Half Dollars from the Uncirculated Mint Sets were struck on special burnished (sandblasted) planchets which were then struck under higher pressure than circulation strike coins resulting in a smooth, “satin finish”. Satin Finish coins are also handled with lots of care throughout the entire production process before finally being inserted in to US Mint Uncirculated Coin Sets. Exemplar Notes: Graded as SP68 with only 3 finer (as of 5/2016), this was acquired 1/2016 from Richard Rude, Bighorn Coin Co.

专家评论

Jaime Hernandez

The Satin Finish 2010-P Kennedy Half Dollars were sold to the public by the U.S. Mint in a 28 Piece Uncirculated Coin Set.

Satin Finish: A Satin Finish coin is a coin which is not released into circulation by the United States Mint. Instead, the coins are sold in Mint Sets only. All Satin Finish coins are struck on special sandblasted planchets, also known as burnished planchets. The coins are then struck under higher pressure than circulation strike coins. Satin Finish coins are also handled with lots of care throughout the entire production process and finally inserted in to United States Mint Sets.
 
2010 Uncirculated 28 - Piece Coin Set: The 2010 Uncirculated 28 Coin Mint Set was first offered by the Mint on July, 15, 2010. The set included eight Satin Finish 2010 Philadelphia and Denver Presidential Dollar coins, from all four different 2010 Presidential Dollar designs.
 
The set also included the 2010 Native American Dollars, Kennedy Half Dollars, Five different America the Beautiful Quarters, Roosevelt Dimes, Jefferson Nickels and Lincoln cents. All Mint Sets contained an example from the Philadelphia and Denver Mints.
 
Each 2010 Uncirculated 28 Coin Mint Set was priced at $31.95 directly from the U.S. Mint. Worth mentioning, is that the 2010 set increased in price compared to the 2009 Uncirculated Mint Set. The 2009 Set was priced $27.95 each directly from the U.S. Mint and it contained 36 coins rather than 28 coins.
PCGS #
416790
设计师
Gilroy Roberts/Frank Gasparro
边缘
Reeded
直径
30.61 毫米
重量
11.30 克
铸币数量
583897
金属成分
75% Copper, 25% Nickel over a pure Copper center
更高评级数量
5
评级较低的钱币数量
55
地区
The United States of America