PMScoggin 1937 Mint Set 的钱币相册
Designer: Victor David Brenner Content: 95% Copper, 5% Tin and Zinc Weight: 3.11 grams Diameter: 19.00 millimeters Edge: Plain Mint: San Francisco Production Strikes: 34,500,000 General Description: Wheat Reverse cents were produced at the Philadelphia, Denver, and San Francisco mints. In general, cents from Philadelphia are well made; those from Denver and San Francisco are often poorly struck from worn dies. Key dates in the series include the aforementioned 1909-S VDB, 1914-D, and 1922 "Plain", plus the 1909-S and 1931-S. Interesting varieties include the 1917 and 1936 Doubled Die Obverse. (Source: Ron Guth, PCGS CoinFacts) Exemplar Notes: Acquired via Heritage Auctions (12/2012)
Designer: James Earle Fraser Content: 75% Copper, 25% Nickel Weight: 5.00 grams Diameter: 21.20 millimeters Edge: Plain Mint: Philadelphia Production Strikes: 79,480,000 General Description: The Type II Buffalo nickel is similar to the Type I of 1913 except for the reverse. The Type II features a restyled area at the bottom of the reverse. The buffalo previously standing on raised ground is now on a line or plane. The inscription FIVE CENTS, earlier on the mound, is now in a recessed portion below the line, thus protecting it from wear. This style was produced from 1913 through the end of the Buffalo motif in 1938. (Source: Bowers, Q. David. “United States Coins by Design Types - An Action Guide for the Collector and Investor”. Edited and updated by Mike Sherman, PCGS CoinFacts) The 1937 is the most common Buffalo nickel in circulated grades and the second most common in mint state and Gem condition (after the 1938-D). The strike is typically sharp and the luster is typically frosty. (David Hall, PCGS CoinFacts) Exemplar Notes: Acquired from Rick Horetsky, 10/2012
Designer: James Earle Fraser Content: 75% Copper, 25% Nickel Weight: 5.00 grams Diameter: 21.20 millimeters Edge: Plain Mint: Denver Production Strikes: 17,826,000 General Description: The Type II Buffalo nickel is similar to the Type I of 1913 except for the reverse. The Type II features a restyled area at the bottom of the reverse. The buffalo previously standing on raised ground is now on a line or plane. The inscription FIVE CENTS, earlier on the mound, is now in a recessed portion below the line, thus protecting it from wear. This style was produced from 1913 through the end of the Buffalo motif in 1938. (Source: Bowers, Q. David. “United States Coins by Design Types - An Action Guide for the Collector and Investor”. Edited and updated by Mike Sherman, PCGS CoinFacts) General Description: The 1937-D is a common Buffalo nickel in all grades. Only the 1937 and 1938-D are easier to find in mint state and Gem condition. Strike is usually very sharp and luster is typically quite frosty. (Source: David Hall, PCGS CoinFacts) Exemplar Notes: Acquired from Terry Roszell, 2/2012
Designer: James Earle Fraser Content: 75% Copper, 25% Nickel Weight: 5.00 grams Diameter: 21.20 millimeters Edge: Plain Mint: Denver Production Strikes: 17,826,000 General Description: The Type II Buffalo nickel is similar to the Type I of 1913 except for the reverse. The Type II features a restyled area at the bottom of the reverse. The buffalo previously standing on raised ground is now on a line or plane. The inscription FIVE CENTS, earlier on the mound, is now in a recessed portion below the line, thus protecting it from wear. This style was produced from 1913 through the end of the Buffalo motif in 1938. (Source: Bowers, Q. David. “United States Coins by Design Types - An Action Guide for the Collector and Investor”. Edited and updated by Mike Sherman, PCGS CoinFacts) General Description: The 1937-D is a common Buffalo nickel in all grades. Only the 1937 and 1938-D are easier to find in mint state and Gem condition. Strike is usually very sharp and luster is typically quite frosty. (Source: David Hall, PCGS CoinFacts) Exemplar Notes: Acquired from Terry Roszell, 2/2012
Designer: James Earle Fraser Content: 75% Copper, 25% Nickel Weight: 5.00 grams Diameter: 21.20 millimeters Edge: Plain Mint: San Francisco Production Strikes: 5,635,000 General Description: The Type II Buffalo nickel is similar to the Type I of 1913 except for the reverse. The Type II features a restyled area at the bottom of the reverse. The buffalo previously standing on raised ground is now on a line or plane. The inscription FIVE CENTS, earlier on the mound, is now in a recessed portion below the line, thus protecting it from wear. This style was produced from 1913 through the end of the Buffalo motif in 1938. (Source: Bowers, Q. David. “United States Coins by Design Types - An Action Guide for the Collector and Investor”. Edited and updated by Mike Sherman, PCGS CoinFacts) The 1937-S is the most common San Francisco Mint Buffalo nickel. It is about as "rare" as the 1937-D. Strike is usually decent for a S Mint Buffalo and luster is usually of the grey brilliant type. (Source: David Hall, PCGS CoinFacts) Exemplar Notes: Acquired via Heritage Auctions, 9/2013
Designer: Adolph Alexander Weinman Content: 90% Silver, 10% Copper Weight: 2.50 grams Diameter: 19.90 millimeters Edge: Reeded Mint: Denver Production Strikes: 14,146,000 General Description: In 1916, a new Dime design was introduced to replace the old Barber design that had been in use since 1892. Designed by A.A. Weinman, the new design featured a portrait of Liberty facing left, wearing a winged cap. Because of the resemblance to the Roman god, Mercury, the coin became known popularly as the "Mercury Head" Dime. The reverse blends a Roman fasces (ax surrounded by a tied bundle of sticks) and an olive branch, indicating America's military readiness but also their desire for peace. The Mercury Head Dime series is one of the most popular in all of American numismatics. Apart from the 1916-D and 1942 overdates, most dates can be obtained with little difficulty. However, several of the dates are extremely rare in high grade. The most desirable issues are those with Full Split Bands on the reverse, which means all of the bands that hold the fasces together on the reverse must be clearly and completely separated. While much attention is focused on the central bands, the bands on the ends of the fasces must be separated, as well. Again, many dates are extremely rare in Gem condition with Full Split Bands. Exemplar Notes: Acquired from Gary Alexander, 3/2012
Designer: Adolph Alexander Weinman Content: 90% Silver, 10% Copper Weight: 2.50 grams Diameter: 19.90 millimeters Edge: Reeded Mint: San Francisco Production Strikes: 9,740,000 General Description: In 1916, a new Dime design was introduced to replace the old Barber design that had been in use since 1892. Designed by A.A. Weinman, the new design featured a portrait of Liberty facing left, wearing a winged cap. Because of the resemblance to the Roman god, Mercury, the coin became known popularly as the "Mercury Head" Dime. The reverse blends a Roman fasces (ax surrounded by a tied bundle of sticks) and an olive branch, indicating America's military readiness but also their desire for peace. The Mercury Head Dime series is one of the most popular in all of American numismatics. Apart from the 1916-D and 1942 overdates, most dates can be obtained with little difficulty. However, several of the dates are extremely rare in high grade. The most desirable issues are those with Full Split Bands on the reverse, which means all of the bands that hold the fasces together on the reverse must be clearly and completely separated. While much attention is focused on the central bands, the bands on the ends of the fasces must be separated, as well. Again, many dates are extremely rare in Gem condition with Full Split Bands. Exemplar Notes: CAC certified. Acquired from James Sego (JMS Coins), 5/2013
Designer: John Flanagan Content: 90% Silver, 10% Copper Weight: 6.30 grams Diameter: 14.30 millimeters Edge: Reeded Mint: Philadelphia Production Strikes: 19,696,000 General Description: In observance of the 200th anniversary of George Washington’s birth, the government decided to redesign the quarter dollar to depict the image of our first president. A lively competition ensued, and picked from this was a proposal of John Flanagan, a New York sculptor. The obverse of the Washington quarter dollar shows the head of Washington, modeled after a bust by Houdon, facing left, with LIBERTY above, IN GOD WE TRUST to the left, and the date below. The reverse shows a modernistic perched eagle, with a wreath below and E PLURIBUS UNUM above. UNITED STATES OF AMERICA and QUARTER DOLLAR inscriptions are at the borders. In silver alloy the type was minted continuously from 1932 to 1964, with the exception of 1933. (Source: Bowers, Q. David, “United States Coins by Design Types - An Action Guide for the Collector and Investor” Washington Quarter Dollars were struck for circulation at Philadelphia, Denver, and San Francisco. Proof versions were struck exclusively at the Philadelphia Mint. Key dates in the series include the 1932-D and S, plus the 1936-D. Major varieties include Heavy, Medium, and Light Mottos of 1934, several Doubled Die Obverses, and some Over-Mintmark varieties (click on the "Date, MM, and Major Variety" tab to see a complete listing). In circulated condition, this series is easy to complete and relatively reasonable in price. Most of the coins are directly affected by the price of silver, so values fluctuate up and down based on the current silver price. Whenever the silver price becomes excessive, most of the coins lose their collector premium, and millions have been melted down over the years for their silver content. In Uncirculated condition, several dates, including the aforementioned key dates, become very valuable. Numerous dates are excessively rare in top grades even though they are common in lower grades. The 1937 quarter is easily available in circulated grades. In Gem MS65 condition, it is somewhat underrated. The most common Gems of the the 1930s are the 1935, 1936, and 1939. It's really all about the mintage and the number of coins that were saved. The 1937 is usually considered the "next in line," but it is arguably more difficult to locate than the 1934 and almost as tough as the relatively low mintage 1938. The typical 1937 mint state example is well-struck, white and frosty. This coin comes nice and Superb Gems are available if you look for them. (Source: David Hall, PCGS CoinFacts) Exemplar Notes: Acquired from David Lawrence Rare Coins, 5/2013
Designer: John Flanagan Content: 90% Silver, 10% Copper Weight: 6.30 grams Diameter: 14.30 millimeters Edge: Reeded Mint: Denver Production Strikes: 7,189,600 General Description: In observance of the 200th anniversary of George Washington’s birth, the government decided to redesign the quarter dollar to depict the image of our first president. A lively competition ensued, and picked from this was a proposal of John Flanagan, a New York sculptor. The obverse of the Washington quarter dollar shows the head of Washington, modeled after a bust by Houdon, facing left, with LIBERTY above, IN GOD WE TRUST to the left, and the date below. The reverse shows a modernistic perched eagle, with a wreath below and E PLURIBUS UNUM above. UNITED STATES OF AMERICA and QUARTER DOLLAR inscriptions are at the borders. In silver alloy the type was minted continuously from 1932 to 1964, with the exception of 1933. (Source: Bowers, Q. David, “United States Coins by Design Types - An Action Guide for the Collector and Investor” Washington Quarter Dollars were struck for circulation at Philadelphia, Denver, and San Francisco. Proof versions were struck exclusively at the Philadelphia Mint. Key dates in the series include the 1932-D and S, plus the 1936-D. Major varieties include Heavy, Medium, and Light Mottos of 1934, several Doubled Die Obverses, and some Over-Mintmark varieties (click on the "Date, MM, and Major Variety" tab to see a complete listing). In circulated condition, this series is easy to complete and relatively reasonable in price. Most of the coins are directly affected by the price of silver, so values fluctuate up and down based on the current silver price. Whenever the silver price becomes excessive, most of the coins lose their collector premium, and millions have been melted down over the years for their silver content. In Uncirculated condition, several dates, including the aforementioned key dates, become very valuable. Numerous dates are excessively rare in top grades even though they are common in lower grades. In mint state condition, the 1937-D is the second most common branch mint Washington quarter of the 1930s after the 1939-D. In the early 1970s, this issue was priced very modestly, barely above the level of the Philadelphia issues. But several dealers recognized this issue as being more rare than the price and the Mid-1970s saw this issue being touted and promoted in price. Today, it has the recognition it deserves, i.e. it's not common in Gem condition, but it's certainly not a rarity. Exemplar Notes: Rich frosty luster and virtually untoned surfaces provide this superb gem with strong visual appeal. CAC certified. Acquired via Heritage Auction, 11/2013.
Designer: John Flanagan Content: 90% Silver, 10% Copper Weight: 6.30 grams Diameter: 14.30 millimeters Edge: Reeded Mint: San Francisco Production Strikes: 1,652,600 The 1937-S is one of the key dates of the Washington quarter series in both circulated and mint state grades. In the 1960s, when markets were made in circulated rolls of all better date then modern coins, a roll of circulated 1937-S quarters was a "hot" item. In fact, in circulated condition, this issue was considered the third rarest of the series after only the 1932-D and 1932-S. The buyers focused on the fact that this issue is the third lowest mintage of the series...and probably rightly so. Today, an argument can be made that the 1934-D and 1935-D are as rare or rarer in circulated condition. They certainly are rarer in Gem condition. In mint state condition, and in Gem MS65 or better for that matter, the 1937-S is about tied with the 1935-S as the second rarest S-Mint Washington quarter with only the 1932-S being rarer. While this issue is not common in Gem condition, it is not as rare as the 1934-D, 1935-D, 1936-D, and of course the 1932-D and 1932-S. The 1937-S was occasionally available by the roll in uncirculated condition in the 1960s and 1970s, but was much less available than most of the other issues of the 1930s. You can find frosty white, well-struck Gems and truly superb specimens are occasionally available. (Source: David Hall, PCGS CoinFacts) The 1937-S Washington Quarter is the third lowest mintage quarter in the series. It is also considered one of the key dates in the series because of its low mintage. At the time it was struck, people were already collecting Uncirculated rolls of coins and thanks to them, many Uncirculated examples of this issue still exist today. Due it its low mintage and Uncirculated examples being saved early on, the coins were always very difficult to find in circulation. In low grades it commands about 5 times more than the generic dates in the series and in Uncirculated grades it commands even higher premiums than the most common dates. (Source: Jamie Hernandez, PCGS CoinFacts) Exemplar Notes: Acquired from Coast to Coast Coins, 12/2012
Designer: John Flanagan Content: 90% Silver, 10% Copper Weight: 6.30 grams Diameter: 14.30 millimeters Edge: Reeded Mint: San Francisco Production Strikes: 1,652,600 The 1937-S is one of the key dates of the Washington quarter series in both circulated and mint state grades. In the 1960s, when markets were made in circulated rolls of all better date then modern coins, a roll of circulated 1937-S quarters was a "hot" item. In fact, in circulated condition, this issue was considered the third rarest of the series after only the 1932-D and 1932-S. The buyers focused on the fact that this issue is the third lowest mintage of the series...and probably rightly so. Today, an argument can be made that the 1934-D and 1935-D are as rare or rarer in circulated condition. They certainly are rarer in Gem condition. In mint state condition, and in Gem MS65 or better for that matter, the 1937-S is about tied with the 1935-S as the second rarest S-Mint Washington quarter with only the 1932-S being rarer. While this issue is not common in Gem condition, it is not as rare as the 1934-D, 1935-D, 1936-D, and of course the 1932-D and 1932-S. The 1937-S was occasionally available by the roll in uncirculated condition in the 1960s and 1970s, but was much less available than most of the other issues of the 1930s. You can find frosty white, well-struck Gems and truly superb specimens are occasionally available. (Source: David Hall, PCGS CoinFacts) The 1937-S Washington Quarter is the third lowest mintage quarter in the series. It is also considered one of the key dates in the series because of its low mintage. At the time it was struck, people were already collecting Uncirculated rolls of coins and thanks to them, many Uncirculated examples of this issue still exist today. Due it its low mintage and Uncirculated examples being saved early on, the coins were always very difficult to find in circulation. In low grades it commands about 5 times more than the generic dates in the series and in Uncirculated grades it commands even higher premiums than the most common dates. (Source: Jamie Hernandez, PCGS CoinFacts) Exemplar Notes: Acquired from Coast to Coast Coins, 12/2012
Designer: Adolph Alexander Weinman Content: 90% Silver, 10% Copper Weight: 12.50 grams Diameter: 30.00 millimeters Edge: Reeded Mint: Philadelphia Production Strikes: 9,522,200 General Description: In 1916 the design of Adolph A. Weinman was selected for the new half dollar motif to replace the Barber design which had been in use since 1892. Weinman, a sculptor, also produced the Liberty Head or “Mercury” dime introduced the same year. The obverse depicts Miss Liberty walking toward the sun, her right arm outstretched, her left arm carrying a bundle of branches, and with a starry cape behind. LIBERTY is above, while IN GOD WE TRUST is to the lower right, and the date is below. The motif seems to have been inspired by Saint-Gaudens’ motif for the illustrious double eagle of 1907. The reverse shows an eagle perched on a rocky crag, from which grows a pine branch, symbol of strength. UNITED STATES OF AMERICA is above, E PLURIBUS UNUM is to the left, and HALF DOLLAR is below. The design has been a favorite with numismatists ever since the time of issue, and many consider it to be one of the most beautiful motifs ever employed on a circulating coin. (Source: Bowers, Q. David Bowers (edited and updated by Mike Sherman, PCGS CoinFacts) The 1937 is fairly available in mint state and Gem condition. It is rarer than the 1936 and 1939, but not as rare as the 1934, 1935, and 1938. Luster is usually white and frosty and strike is typically sharp. (Source: Hall, David. PCGS CoinFacts) Exemplar Notes: Acquired from Pinnacle Rarities, 5/2013
Designer: Adolph Alexander Weinman Content: 90% Silver, 10% Copper Weight: 12.50 grams Diameter: 30.00 millimeters Edge: Reeded Mint: Denver Production Strikes: 1,676,000 General Description: In 1916 the design of Adolph A. Weinman was selected for the new half dollar motif to replace the Barber design which had been in use since 1892. Weinman, a sculptor, also produced the Liberty Head or “Mercury” dime introduced the same year. The obverse depicts Miss Liberty walking toward the sun, her right arm outstretched, her left arm carrying a bundle of branches, and with a starry cape behind. LIBERTY is above, while IN GOD WE TRUST is to the lower right, and the date is below. The motif seems to have been inspired by Saint-Gaudens’ motif for the illustrious double eagle of 1907. The reverse shows an eagle perched on a rocky crag, from which grows a pine branch, symbol of strength. UNITED STATES OF AMERICA is above, E PLURIBUS UNUM is to the left, and HALF DOLLAR is below. The design has been a favorite with numismatists ever since the time of issue, and many consider it to be one of the most beautiful motifs ever employed on a circulating coin. (Source: Bowers, Q. David Bowers (edited and updated by Mike Sherman, PCGS CoinFacts) The 1937-D and 1937-S are very comparable in terms of mintage and rarity in mint state and Gem condition. The 1937-D is rarer than the 1936-D and considerably rarer than the 1939-D, but it is not quite as rare as the 1938-D and the 1934-D and 1935-D are way rarer than any of the other D-Mints including the 1937-D. I have seen numerous original uncirculated rolls of both the 1937-D and 1937-S "back in the day," i.e. the 1970s when rolls of coins from the 1930S were still trading intact in the numismatic market place. The 1937-D is usually well struck and luster can be quite frosty. (Source: Hall, David. PCGS CoinFacts) Exemplar Notes: CAC certified. Ex Dakota Collection. Acquired from David Lawrence Rare Coins, 1/2012
Designer: Adolph Alexander Weinman Content: 90% Silver, 10% Copper Weight: 12.50 grams Diameter: 30.00 millimeters Edge: Reeded Mint: San Francisco Production Strikes: 2,090,000 General Description: In 1916 the design of Adolph A. Weinman was selected for the new half dollar motif to replace the Barber design which had been in use since 1892. Weinman, a sculptor, also produced the Liberty Head or “Mercury” dime introduced the same year. The obverse depicts Miss Liberty walking toward the sun, her right arm outstretched, her left arm carrying a bundle of branches, and with a starry cape behind. LIBERTY is above, while IN GOD WE TRUST is to the lower right, and the date is below. The motif seems to have been inspired by Saint-Gaudens’ motif for the illustrious double eagle of 1907. The reverse shows an eagle perched on a rocky crag, from which grows a pine branch, symbol of strength. UNITED STATES OF AMERICA is above, E PLURIBUS UNUM is to the left, and HALF DOLLAR is below. The design has been a favorite with numismatists ever since the time of issue, and many consider it to be one of the most beautiful motifs ever employed on a circulating coin. (Source: Bowers, Q. David Bowers (edited and updated by Mike Sherman, PCGS CoinFacts) The 1937-S is a scarce coin in mint state and Gem condition, but it is available. It is about as rare as the 1937-S. As far as S-Mints go, it is the second most common S-Mint of the 1930s after the 1939-S. The strike is usually sharp for an S-Mint and luster is often frosty white and outstanding. (Source: Hall, David. PCGS CoinFacts) Exemplar Notes: CAC certified. Acquired from The Reeded Edge, 12/2012.